Changes for page Ubuntu Linux

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -15,11 +15,17 @@
15	15	As far as I can tell, there is no feasible way to convert Windows to GPT and UEFI boot without reinstalling it. In my case this was fine, because major parts of the computer's hardware (mainboard and CPU) had been changed and Windows does not handle these kind of changes well anyway. So here is the step by step process that worked for me:
16	16
17	17	1. Be sure to make a backup of your computer's harddisk. As part of this process some data has to be deleted and there also is a chance to lose more data, because something goes wrong.
	18	+
18	18	1. Boot from the Ubuntu 12.04 LTS Desktop CD (64-bit). Make sure to boot in UEFI mode. You can either disable PC-BIOS mode in your computer's boot setting or select the UEFI mode in the computer's boot select menu. How to do this strongly depends on your computer's mainboard.
	20	+
19	19	1. Add the Universe repository to the software sources and install `gdisk`. Probably it is a good idea to make a backup of your harddisk's MBR using `dd`. For the rest of this guide we assume that your disk drive is `/dev/sda`. So run `sudo gdisk /dev/sda`. `gdisk` will automatically [convert your disk from MBR to GPT](http://www.rodsbooks.com/gdisk/mbr2gpt.html), keeping the partitions (if possible). Now you have to delete the Windows "reserved" and system partitions. Typically, these are the first two partitions on the disk. Now exit `gdisk` saving the changes.
	22	+
20	20	1. Shutdown the Ubuntu system and boot from the Windows 7 installation DVD (in UEFI mode). The Windows 7 installer can automatically create the needed partitions in the free area of the disk, that you created by deleting the Windows partitions earlier. It will create three partitions: Two special ones mainly needed for booting and a regular one for the Windows system partition.
	24	+
21	21	1. When the installer rebooted, I got a funny error every time I tried to boot from the harddisk. I got a blue screen with an error code of 0xc0000225. After some time I [figured](http://forums.anandtech.com/showthread.php?t=2260563) [out](http://www.computerbase.de/forum/showthread.php?t=1152436) that this was caused by the second harddisk in the computer being formatted using MBR. After converting this disk to GPT, everything worked smoothly. Windows is supposed to support mixed GPT and MBR disks in the same system, however in some causes it seems to cause trouble.
	26	+
22	22	1. After the Windows installation has finished, we can boot back into Ubuntu using the Ubuntu 12.04 LTS Desktop CD. Again, we have to boot in UEFI mode.
	28	+
23	23	1. We have to change to the target system by mounting all required partitions and chrooting to the target system. How to do this exactly depends on your system layout. In my case, I had the boot partition on /dev/sda4 and all other partitions in LVM. Therefore, I first installed the `lvm2` package, activated the volume group `vg0` with `vgchange -a y vg0` and mounted all required filesystems with the commands
24	24	```bash
25	25	sudo mount /dev/vg0/root /mnt
...	...	@@ -34,23 +34,33 @@
34	34	sudo mount -o bind /sys /mnt/sys
35	35	```
36	36	In this example the system's ESP (this is the partition where the EFI boot-loaders are stored) has been created by the Windows setup as `/dev/sda1`.
	43	+
37	37	1. Now we can change into the target system:
38	38	```
39	39	sudo su -
40	40	chroot /mnt
41	41	```
	49	+
42	42	1. You should make a backup of the GRUB configuration files before proceeding. The relevant files are in `/boot/grub`, `/etc/default/grub` and `/etc/grub.d`.
	51	+
43	43	1. Now you should purge all GRUB packages. You can usually do this by running `aptitude purge "?name(grub-)" "?name(grub2-)"`.
	53	+
44	44	1. Next you should delete all remaining GRUB files (`/boot/grub`, `/etc/default/grub` and `/etc/grub.d`). Then you should create a symbollink in `/boot` that points to the install location of GRUB in the ESP: `ln -s efi/EFI/grub /boot/grub`.
	55	+
45	45	1. After that you can install the EFI version of GRUB: `aptitude install grub-efi`.
	57	+
46	46	1. In the target system, we have to edit `/etc/fstab` and add an entry for the ESP. You can find out the UUID of the partition by running `grub-probe --target=fs_uuid /boot/efi`. Then add a line like
47	47	```
48	48	UUID=<UUID> /boot/efi vfat defaults 0 1
49	49	```
50	50	to your /etc/fstab (of course you have to replace `<UUID>` by the UUID printed by `grub-probe`.
	63	+
51	51	1. Now we install GRUB with `grub-install --boot-directory=/boot/efi/EFI --bootloader-id=grub --no-floppy --recheck` (I got this from [another guide](http://thinkpad-forum.de/threads/123262-EFI-Grub2-Multiboot-HowTo)).
	65	+
52	52	1. You might have to edit `/etc/default/grub` to suit your needs. I disabled the OS prober (because it does not detect the UEFI Windows loader anyway but found some old systems on my second harddisk) by adding `GRUB_DISABLE_OS_PROBER="true"`. I also changed `GRUB_HIDDEN_TIMEOUT` to the empty string and `GRUB_HIDDEN_TIMEOUT_QUIET` to `false`. This was needed because the OS prober was disabled and thus GRUB would not show the boot menu by default any longer (the same would happen if OS prober was enabled but it did not find other operating systems).
	67	+
53	53	1. Because memtest86+ was installed on the system, I had to copy the file `20_memtest86+` from the backup of the GRUB configuration files back to `/etc/grub.d`.
	69	+
54	54	1. In order to be able to boot Windows 7 from GRUB (using the boot menu of the EFI BIOS is inconvenient), I added an extra entry to `/etc/grub.d/40_custom` (as describe in the [Ubuntu Community Wiki](https://help.ubuntu.com/community/UEFIBooting#Chainloading_Windows_x86_64_UEFI-GPT)):
55	55	```
56	56	menuentry "Windows 7 (UEFI)" {
...	...	@@ -59,8 +59,11 @@
59	59	}
60	60	```
61	61	In this example `<UUID>` again has to be replaced by the UUID of the ESP.
	78	+
62	62	1. In order to generate the GRUB configuration file, `update-grub` needs to be run.
	80	+
63	63	1. Finally, GRUB has to be registered in the EFI settings. This can be done by running `efibootmgr --create --gpt --disk /dev/sda --part 1 --write-signature --label "GRUB" --loader "\\EFI\\grub\\grub.efi"`.
	82	+
64	64	1. After finishing these steps, you can leave the target system and unmount all partitions. Finally, reboot the computer and select GRUB from the computer's boot menu. Now you should see the normal GRUB screen, where you can select to boot Linux or Windows.
65	65
66	66	# Configuring the Vino VNC server on Ubuntu Desktop
...	...	@@ -86,4 +86,3 @@
86	86	```bash
87	87	aptitude search "?config-files"
88	88	```
89		-