Changes for page Internet Protocol (IP)

Last modified by Sebastian Marsching on 2022/05/29 14:01
From version 1.1
edited by Sebastian Marsching
on 2022/05/29 13:22
Change comment: There is no comment for this version
To version 2.1
edited by Sebastian Marsching
on 2022/05/29 13:22
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -15,7 +15,7 @@
15 15  
16 16  I use `-I` instead of `-A` because this rule should be the first rule in the `FORWARD` chain, so that it is applied to all packets passing through.
17 17  
18 -If you are experiencing MTU related problems, you might also be interested in some informationen regarding the MTU setting for [6to4 tunnels](https://sebastian.marsching.com/wiki/Network/IPv6) and [OpenVPN virtual private networks](https://sebastian.marsching.com/wiki/Network/OpenVPN). You should try the fixes described there first (if applicable), because using the clamp MSS options is more of a last resort then a best practice.
18 +If you are experiencing MTU related problems, you might also be interested in some informationen regarding the MTU setting for [6to4 tunnels](https://sebastian.marsching.com/wiki/Network/IPv6) and [[OpenVPN virtual private networks|doc:Software.OpenVPN.WebHome]]. You should try the fixes described there first (if applicable), because using the clamp MSS options is more of a last resort then a best practice.
19 19  
20 20  ## MTU and MSS Explained
21 21  
... ... @@ -43,4 +43,4 @@
43 43  ping -D -s 1472 <target>
44 44  ```
45 45  
46 -Add 28 to the largest number with which the ping is successful. The resulting number is the MTU.
46 +Add 28 to the largest number with which the ping is successful. The resulting number is the MTU.